ANYTEC A27 CAB, Owner'S Manual

Page: 48 / 88

3. GENERAL INFORMATION __PAGE 40
3.11.2 Switch panel
3.12 T
RAILERING
Anytec do not offer a specific trailer for this boat. Your Anytec dealer can recommend
or sell you a suitable trailer. Before placing your Anytec boat onto any trailer, make sure
that the trailer is designed for your boat weight and its shape.

The trailer should have a bow rest, center keel rollers and keel guards/wobble
rollers which will distribute the weight properly, offering good support for the
keel and hull in both vertical and horizontal direction. Adjust the side supports
so that the maximum boat weight rests on the keel supports and the side
supports only offer lateral support.

The mass of your boat in trailering condition is found in chapter 3.1. This
includes the weight of the maximum size engine and a fully optioned boat along
with full liquid loads. This does not include luggage/gear weight, any crew or any
water inside the boat. Always remove any unnecessary weight such as loose
accessories and luggage from the boat and drain the bilge water before trailering.
AUX
AUX
AUX
AUX
ON
OFF
ON ON
OFF OFF
BOW THRUSTER
SERVICE
ENGINE
BILGE PUMP NAVIGATION LIGHT ANCHOR LIGHT
AUX
AUXILIARY 1
LOW SPEED WIPER HIGH SPEED WIPER
AUX
AUXILIARY 2 ROOF HATCH OPTION
AUX
AUXILIARY 3 INTERIOR LIGHT CABIN LIGHT ROOF HATCH CLOSE
ON
OFF
ON
OFF
ON
OFF
ENGINE BATTERY AUXILIARY BATTERY
SERVICE BATTERY BOW THRUSTER
BATTERY