The NTS500 is a high performance industrial borescope with a 5-inch high definition
color LCD, It is ergonomically designed so that the main function buttons can be
controlled with one hand. The snapshot and recording functions are supported, while
the photos and videos are saved to a TF memory card (micro-SD card). This product
integrates high-brightness illumination, a quick-access flashlight and a 6-LED ringlight
for the camera probe, so that the product can be used in dark environment. The built-in
3500mAh rechargeable lithium battery has a working time of up to 4 hours.
Warning: This product is an industrial borescope camera and is not intended for
medical use or human examination.
Please avoid hitting the camera probe, and do not pull on the cable
The camera probe is covered in a waterproof protective layer. Please avoid damaging
this layer as best possible.
The camera probe is temperature sensitive and should not exceed an temperature
above 113°F (45°C). Take care when inspecting automotive engines to make sure
the engine has cooled.
Keep the tool dry, clean, free from oil, water, gas or other materials that may cause
corrosion.
This appliance is not intended to be used by people with limited physical, sensory or
mental capabilities. This appliance is not intended for medical use.
Keep bystanders or children away while operating the tool.
If the device is damaged, do not disassemble it. Please contact Teslong customer
service - see last page of this manual.
Please use a 5V household charger that meets the safety regulations to charge this
device.
This device can work while charging.
If you do not use the device for a long time, please ensure that it is charged at least
once every 3 months to prevent irreparable damage caused by excessive battery
discharge.
Product Manual
Safety and Maintenance
Battery Description
The camera probe is interchangeable, it can be swapped for different probes with
alternate lengths, diameters, view angles and focal lengths.
- 01 -
.
