AnyFit PS06, Manual

Page: 10 / 12

15 16
Step 5
1. Attach 1×Side Cover (Right Front) (#36), 1×Side Cover (Left Front)(#35),
1×Side Cover (Right Rear)(#38), 1×Side Cover (Left Rear)(#37), 1×Bottom Shield(#41)
to Weight Frame Assembly(#1), using:
4×Button Head Cap Bolt M8X16(#55) 4×Flat Washerφ8.5Xφ16X1.5(#48)
20×Button Head Cap Bolt M6X20(#54) 20×Flat Washerφ6.5Xφ12X1.2(#47)
2. Attach 2×Storage Box(#42) to Right Front Shield Frame(#10) and Left Front Shield
Frame(#9), using:
8×Cross Recessed Round Head Screw M4×10(#45) 8×Flat Washer Φ4.3×Φ12×1(#44)
3. Attach 1×Right Front Shield Frame(#10), 1×Left Front Shield Frame(#9),
1×Back Shield(#40) to Weight Frame Assembly(#1), using:
8×Button Head Cap Bolt M5X10(#53) 8×Flat Washer φ5.5Xφ15X1(#46)
4. Attach 2×Top Shield(#39) to Weight Frame Assembly(#1), using:
10×Button Head Cap Bolt M6X20(#54)
5. Attach 1×Waist Pad(#33), 1×Square Seat Pad(#34) to Main Frame Assembly(#2),
using:
6×Button Head Cap Bolt M10X30(#57) 6×Flat Washer Φ11XΦ20X2(#49)
6. Attach 1×Long Foam(#31), 2×Stainless Steel Round Plate(#22),
1×Decorative Capφ80(#25) to Swing Arm Frame(#6), using:
1×Flat Head Cap Screw M8X20(#51)
Notice:
1. Fasten Bolt According to Assembly Requirement
2. Back Shield shall align the height with the Weight Frame fixator,
put one side into the Aluminum Strip, then assembly the other side.
54
53
54
1
54
38
36
35
54
54
33
34
31
22
22 25
51
42
44
45
44
41
55
48
53 46
10
40
2
6
46
45