AnyFit PS05, Manual

Page: 10 / 12

15 16
5. Attach 1×Seat Pad(#42), 1×Back Pad（2 Holes）(#43) to Main Frame Assembly（#2）,
using:
3×Button Head Cap Bolt M10X30（#57） 5×Flat Washer φ11×φ20×2（#70）
2×Button Head Cap Bolt M10X75（#60）
6. Attach 1×Handle Frame(#8) to Main Frame Assembly（#2）, using:
2×Hex Head Bolt M12X25（#62） 2×Hex Head Bolt M12X130（#66）
6×Flat Washer Φ13×Φ24×2（#71） 2×Nut M12（#75）
Notice:
Fasten Bolts and Nuts According to
Assembly Requirement.
Step 5
1. Attach 1×Side Cover (Right Front) (#19), 1×Side Cover (Left Front)(#20),
1×Side Cover (Right Rear)(#21), 1×Side Cover (Left Rear)(#22),
1×Bottom Shield(#25) to Weight Frame Assembly(#1), using:
4×Button Head Cap Bolt M8X16(#54) 4×Flat Washer φ8.5Xφ16X1.5(#69)
20×Button Head Cap Bolt M6X20(#53) 20×Flat Washer φ6.5Xφ12X1.2(#68)
2. Attach 2×Storage Box(#26) to Right Front Shield Frame(#17) and
Left Front Shield Frame(#18), using:
8×Cross Recessed Round Head Screw M4×10(#45)
8×Flat Washer Φ4.3×Φ12×1(#46)
3. Attach 1×Right Front Shield Frame(#17), 1×Left Front Shield Frame(#18),
1×Back Shield(#24)to Weight Frame Assembly(#1), using:
8×Button Head Cap Bolt M5X10(#52) 8×Flat Washer φ5.5Xφ15X1(#67)
4. Attach 2×Top Shield(#23)to Weight Frame Assembly(#1), using:
10×Button Head Cap Bolt M6X20(#53)
Notice:
1. Fasten Bolt According to Assembly Requirement
2. Back Shield shall align the height with the Weight Frame fixator, put one side into
the Aluminum Strip, then assembly the other side.
28
50
3
65
58 38
12 44
12
4
42
43
60
8
62
66
5
2
1
26
45
46
54
25
23
53
68
53
52
18
68
53
20
53
23
24
22
68
53
21
68
53
52
46