Any Spot AS-TV5, User Manual, Page: 16 / 36

Operation of TV5 and Optional Modules (See Page 13)
1. For AC power operation or Charging: Connect the DC end of the
Power Supply/Charger cable to the DC In Jack (
I
1). Then connect the
other end (AC plug) to the AC wall outlet.
2. See page 2 for more information on Charging, Power Switch, and LED
Indicators.
3. The Aux Out Jack (
I
5) provides a Pre-Master, Pre-Tone line level
output of the entire mix.
4. The Aux In Jack ( I 6) is a line level input and is controlled by the Aux
Volume (
I
9).
5. The ¼" Mic Input (
I
7) will accept balanced or unbalanced, high or low
impedance mic signals, and is controlled by the Mic Volume (
I
8).
6. Turn the Tone control (
I
10) to the left for more bass and to the right for
more treble. This affects the entire mix of inputs, but not the Aux Out
signal.
7. The Master Volume (
I
11) controls the overall volume of the entire mix,
but has no effect on the Aux Out signal.
J. AS-TVF Optional Media Player. (See page 13)
1. The TVF will play audio in the MP3 format from either SD Cards or
USB Devices. Press (J1) to switch on the power. The LCD (J2) will
display “C” when an SD card is inserted into the slot (J8), or display
the “USB symbol” when a USB device is plugged into the USB Jack
(J10). Track number, time counter, and play/pause status will also be
displayed. To switch from one format to the other, simply unplug one
media device and plug in the other.
2. Normal track play functions are controlled by buttons (J3) thru (J7).
The Repeat button (J5) offers three modes: Off, repeat track, and
repeat all tracks.
3. (J11) controls the volume. The Pitch (speed) of playback may be
altered up or down using (J9). For normal Pitch set the control to the
center detent.
For a Description and Operation of the Optional Wireless Microphone
Receiver (TVREC)
(see pages 7 and 11)
.
Notice:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding the RF
exposure requirements and void the user's authority to operate the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
14