Regular Installation
For Midi EM-locks (Model AXM-800M), maximum thickness of door is 48 mm.
Recommendation :
For Maxi EM-locks (Model AXM-1200M), maximum thickness of door is 46 mm.
LZ or Z bracket for inswing doors
1. Pass the power cable through the
mounting plate and Opening Type
wiring slot of the magnetic lock.
2. Combine the arc of the mounting
plate with the arc of the magnetic
lock.
3.Embed the maglocks into the mounting
plate. Fit the magnetic lock from the
bottom to the mounting plate.
4.Use the Allen wrench and fixing
screws to tighten the mounting
plate and magnetic lock.
Fold the mounting template 90°.
Drill the holes according to the
marks.
The rubber washer makes the
surface of the armature plate
adjustable in order to completely
fit the surface of magnetic lock.
Fix the mounting plate on the
door with mounting screws.
Connect the power and test the
unit.
Place the template to the proper
position of the door and frame.
Mark the hole positions of the
template on the door and frame.
Please install the armature plate
as illustrated here. (Dimensions
of the holes depend on the door
types illustrated below.)
Fasten the mounting plate with
the mounting screws. The position
of the mounting plate should be
adjustable.
Use the Allen wrench and fixing
bolts to tighten the electromagnetic
lock to mounting plate.
Drill a Ø8mm hole through
door, on closing side. Enlarge
to Ø12.7mm by a sexnut bolt
on the opening side.
Drill a Ø6.8mm hole
and tap on closing side
a M8x1.25 thread.
Drill a Ø8mm hole through
door on closing side. Enlarge
to Ø12.7mm by a sexnut bolt
on the opening side.
The depth is 36mm.
Find a mounting position on the door
frame for the L bracket. Make sure that
the door can still be closed.
Use the fixing bolts to tighten the
magnet on L bracket.
Assemble the Z bracket and make
sure that the Z bracket is adjustable.
Insert the guide pins into the
armature plate.
Copyright All rights reserved. P-MU-AM-AXM Published on: 2021.01.29
