T5S
1. Installation Diagram
Installation Steps:
Drill holes in the wall and follow the hole
position on back panel.
Install and fix back panel, connect related
cables.
Fix access control reader.
①
②
③
2. Wiring Instruction
3. T5S connects with T5 Pro
4. T5S connects with VF / VP30
J8
J9
!
Notice:
Please carefully check the access controller wiring diagram before connection. Any damaged products due to improper wirring
are not covered under the product warranty.
T5S work with standalone access control device such as T5pro,
VF30 and one access control device can only pair one T5S.
J8
J9
Relay states
T5S is an extended fingerprint slave reader for Anviz access
controller.It does not store any fingerprint template or match the
fingerprint and just sends the fingerprint template to access
controller via the RS485 to become a distributed access control
system.
