User Manual
5
2.
Operation Guide
2.1.
Interface Introduction
Note:
The restart operation will not delete any user data stored in the device.
2.2.
Upper Electricity
The DC 12V Power supplies the power to the device. Blue LED flashes fast and
Fingerprint Sensor lights with beeps.
There are 4 cards in the packing: Enroll Card
, Delete Card
and User Card
* 2.
2.3.
Register User
2.3.1.
Register User’s Fingerprint
At first, swipe the Enroll Card. The blue LED will flash quickly, and enter into the
registration stage. Now, we can register the user finger.
1. After finish enrolling current user, please swipe enroll card and then continue
register another user.
2. After finish enrollment, please swipe enroll card TWICE to exit enroll status.
Note:
When place finger, Red LED flashes with two long beeps means the finger