+1.425.820.8221
www.anuraco.com
17
APPENDIX A
Bluetooth Dongle Installation Information
Anuracom uses a Bluetooth 4.0+ USB dongle and installs a specific driver
for it during the software installation. This creates communication with
the Bluetooth chip inside the BLE-485. To install Anuracom correctly,
insert Bluetooth dongle into USB port and ignore all self-installed settings
from the dongle manufacturer. Then install Anuracom following prompts.
{image here } When prompted to choose the zadig port – It will
automatically list your Bluetooth dongle as your latest installed USB
device. IMPORTANT: Make sure to choose your Bluetooth 4.0+ dongle
and not any other USB port devices installed on your computer!!
Anuracom will NOT FUNCTION PROPERLY if you do not choose the
Bluetooth dongle from this list. If at the end of the installation Anuracom
does not open correctly, then you will need to reinstall and choose the
correct USB port with your dongle properly inserted.
If you do not see your Bluetooth USB device name, then either you do not
have it installed in your USB port correctly, or it is not an approved USB
Bluetooth 4.0+ dongle. Quit the installation process and try reinserting
your USB dongle into the USB port or into a different USB port on your
computer and start the installation process again.
