8
2
Installation and Setup
This section provides information on installing the Messenger and confirming its initial
operation.
It is recommended to read the entire chapter before starting the installation.
2.1
Installation Steps
Installation consists of the following steps:
1.
Unpack the Equipment.
2.
Mount the Equipment.
The Messenger should be mounted in a vertical position to try and minimize
the chance of water entering through the antenna connection. The antenna wire
should have a service loop just below the antenna connector.
3.
Connect Main Power.
4.
Connect field signals (digital, analog, Modbus) to the appropriate wire.
2.2
Unpacking the Equipment
The Messenger is shipped with the following:
The Messenger electronics in a Deutsch thermoplastic enclosure or a board
only product
A Cellular antenna (magnetic mount or bulkhead)
User’s Guide
Optionally, a cable harness
2.3
Mounting the Equipment
The Messenger is available in an automotive grade weather resistant enclosure.
NOTE: Mount the Messenger vertically and provide a service loop for the antenna
cable to prevent water intrusion.
