Antx Messenger 600, User Manual

Page: 29 / 40

29
7.7 Channel Configuration – Type 9
Parameters for Analog Channel Configuration
(channel numbers 51-300 are pre-defined analog channels)
Parameter
Code
Reference Description Default
1 Name A representative name to reference the
channel by.
Channel
Specific
ASCII Text
30 characters max
2 Mode Defines operating mode of channel. Disabled
[0]
0 = disabled
3 = Report digital on change of state,
analog on delta violation
3 Alarm
Delay
The continuous time the value must
exceed a limit before it is considered to
be in violation of that limit.
10
Range 0 – 65535 seconds
0 = no delay time, immediate alarm
6 Precision Digits to the right of the decimal point.
Affects precision of value displayed and
precision of value reported to host
server.
0
Range 0 – 8
7 Low
Warning
Limit
Low warning limit -1.0
Floating point value – e.g. 15.2
Range -999999.0 to 999999.0
-1.0 disables limit
8 Low
Alarm
Limit
Low alarm limit (should be less than
low warning).
-1.0
Floating point value – e.g. 12.8
Range -999999.0 to 999999.0
-1.0 disables limit
9 High
Warning
Limit
High warning limit -1.0
Floating point value – e.g. 26.4
Range -999999.0 to 999999.0
-1.0 disables limit
10 High
Alarm
Limit
High alarm limit (should be greater than
high warning).
-1.0
Floating point value – e.g. 28.1
Range -999999.0 to 999999.0
-1.0 disables limit
1 – enabled
0 – disabled