Mark the lower point of the board on the wall
(preferably above a door frame).
Screw the Power Ant Mini firmly with little
force, so that you can already turn the board.
Drill with a 10 mm stone driller a 80mm deep
hole into the concrete wall and put one of the
plugs into it.
Adjust the board into a symetric position,
mark the two left holes, drill them, etc.
If all bolts are screwed in check the solidity of
the installation.
Dear Sportsfreund,
you have a Power Ant Mini from antworks in
front of you. We hope you will have as much
fun with it as we have. However, based on
our experience we are pretty confident about
that. If you ever happen to have a problem
with your combiboard, if it has a defect or if
there is any other reason for your dissatis-
faction with the Power Ant Mini, we would
like to ask you (no, actually beg you) to tell
us immediately. We will find a proper solution
for you as fast as possible so we can make
sure you are having fun with your Power Ant
Mini. Why are we asking for this? antworks
is still a very young company and we can not
afford disgruntled customers.
So if you are happy with your board, go and
scream it out to the whole world, if not, let us
know so we can solve your problem. Thank
you so much and keep on reading.
Manufacturing
It is made from 40mm thick, laminated
beech wood. The outer contour and the fin
-
ger pockets are milled by a CNC-lathe with
a special mill bit which creates a perma-
nently rough surface to achieve optimal grip
under all circumstances. The holes and the
finishing is made in our workstation by hand.
To allow the wood to absorb moisture from
sweaty hands, the surface stays untreated.
Maintenance
The Power Ant Mini is untreated. With ongo-
ing training the wood will stain from sweat
and grime at the spots where the hands usu-
ally touch it. You can sand out the staining
with fine sand paper if necessary. Apart from
that the board requires no further mainte
nance.
Training
The Power Ant Mini is a training board for
climbing enthusiasts, pull-up fanatics and
everyone who wants to become one. The
board is especially suited for beginners in
pull-up training.
Please make sure you are properly warmed
up before you start your pull-up training. Pull-
ups with „cold“ arms can lead to injuries of
muscles and tendons. And yes, training is
only useful if it is done over a longer period
of time.
Finally we are leaving you with a little,
use-
ful advice
. Pull-ups are hard, and that is
how it is supposed to be. If you ever get to
the point where you feel you can‘t do another
pull, ask yourself the question if you could
do another if someone would offer you EUR
100 for every additional pull-up. Try it out, it
really works.
So, now bolt that thing to the wall and ...
... torture yourself!
Content
•
1 Power Ant Mini
•
2 Sticks
•
3 stainless bolts
•
3 TOX plugs
•
3 stainless washers
works
ant
600
250
150
45
0
36
5
190
40
30
20
30
20
works
ant
works
ant
works
ant
600
250
150
45
0
36
5
190
40
30
20
30
20
works
ant
works
ant
works
ant
600
250
150
45
0
36
5
190
40
30
20
30
20
works
ant
works
ant
PRISMACOLOR
MA
YKEST
AG
10
PRISMACOLOR
MA
YKEST
AG
10