07. OFFSET
If there is no cable patched in an input, the channel uses
a preset voltage, changed by the top switches. There are
two options:
.
is 5V
..
is 10V
The 8 channels are split into two groups for the preset
voltage, each set independently by their corresponding
switches. The groups are marked by an outlined and a
filled circle above the input jacks and next to the switch-
es. If a channel is set to bipolar mode, the output will be
+/-5V or +/-10V.
Combining offset with mixing, you can offset an incoming
signal with an input left unpatched.
GROUP A
GROUP B
A
B
INPUT 1
INPUT 1 WITH
OFFSET
Summary of Contents for ATN8
Page 1: ...ANTUMBRA ATN8 MANUAL ...
