USER MANUAL
PAGE 8
ANTTRON ©2018
TM2HD
Set the file you want to play
from the USB stick
Enter the filename where you
want to record to.
Select yes or no to stop the
current action
Leave this menu
TM2HD 2.2
DVB SETTINGS
TM2HD 2.2
USB
TM2HD 2.2
PLAY
TM2HD 2.2
RECORD
TM2HD 2.2
STOP
TM2HD 2.2
x
Finish with the enter character
to start recording
TM2HD 2.2
EXIT
TM2HD 2.2
[YES]
TM2HD 2.2
[YES]
In order to operate the USB menu, please connect at first an
USB Stick 3.0
and then power up the
TM2HD.
With the USB stick connected you can play files. Please note that only files with the extension .ts can
be played through this device. If you play a file, the source connected to input A will be interrupted and
in the output you will find your .ts file.
As mentioned in the introduction, if you select a file this will played continuously. At the end of the file,
the TM2HD will play again the same file.
If you want to
play a selection of files
, then name your files sequentially. For instance, file001,
file002, file 003. (all with .ts extension). Then, if you select a file from this list, the file will start to
play. At the end the TM2HD will look for the same file name with a higher number (for instance if you
start with file002, it will look at the end of this file for file003 etc. and play the following file). When no
higher number is found it will start again with file001..
To easily create your .ts files please see section 6.5 in this manual. Indeed on the Anttron website you
can find some easy to use software to produce appropriate .ts files for your TM2HD.
efgh[i]jkl
TM2HD001.ts