USER MANUAL
PAGE 5
ANTTRON ©2013
3 - Installation and menu structure
3.1 - Installation
Install the TM220HD against a wall using the wall fixation brackets to ensure cooling of the housing
through natural convection. ( see drawing)
Connect the audio and video source using a HDMI cable. Connect the RF input cable (if present) and
the RF output cable. If the RF input is not used, please connect a 75 ohm terminating resistor to it.
Once the modulator installed and the cables connected, please proceed connecting the power supply to
the modulator.
3.2 - Powering up
Plug in the connector of the power supply. The display will show the ANTTRON logo while booting.Once
the modulator has booted correctly the main menu will appear.
In the first line the model number is displayed (TM220HD) followed by the installed firmware version.
When the modulator is encoding, the actual resolution is displayed in the bottom line of the display
When the modulator in intialising, the mention INIT is displayed at the bottom line.
TM220HD
TM220HD 2.6
CONFIGURATION
DVB SETTINGS
A/V SETTINGS
TS SETTINGS
1280x720-50fps