INSTRUCTIONS
1
/
Installation
Installation Instruction Manual
ANTOP’s New Generation Digital Technology
Your Clear Bar Smartpass Amplified HDTV Antenna / AT-215B is perfect for indoor use. The
Clear Bar is part of ANTOP’s New Generation Digital Technology that allows you the flexibility to
set up your antenna in various locations and still receive a great digital reception.
Following are instructions for installation options for indoor table top use, wall mounted or
placed in an attic. Read through all instructions prior to beginning installation procedure.
Note:
Although this antenna is great for indoor use, a higher mounting location or
placement positioned towards the broadcast tower may result in better reception. Install
the antenna as high as possible, and preferably with a clear path between the antenna
and the TV station transmitters. Trees, buildings, mountains, etc., can all impact the
performance of any antenna. This antenna can also be placed in attic.
• Smartpass Amplifier: all-in-one design allows easier connection, delivers correct
balance between short and long range reception.
• 4G LTE filter: blocks 3G and 4G wireless signals to ensure noise-free digital TV
reception.
1.1
1
1.1 For Table Top Mounting with Stand
For horizontal positioning: Hold the antenna in a horizontal position then slide the antenna
downwards into the stand. Slide down until slots on back side of antenna go into the stand.
For vertical positioning: From rear view of antenna, hold the antenna right side down. Slide the
antenna downward into the stand. Slide down until tab on right side of antenna go into the
stand.
Fig. 1.1
Wiring Upwards
Slide downwards into the stand
