9
QUICK SET-UP
Local User Interface
The AB-HDRX has two control buttons and several status LED’s on the front panel. Any changes made via a remote control interface will be reflected by the front
panel LED’s.
The AB-HDRX can be pre-configured using the programmable serial interface and then quickly changed between preset modes using the “Set” pushbutton.
AB-HDRX Receiver User Interface
Control/Indicator
Description
Set Button
Advances the unit through the
presets. The 1-16 LED’s indicate in
GREEN, which preset is currently
active.
AB-HDRX
SET
SCAN
System Fault
Signal Strength
RX Lock
Streaming
Decoder
5
6
7
8
16
15
14
13
1 2 3 4
12 11 10 9
SCAN (future feature)
Scans available presets until it
locks on an incoming signal.
RSSI
LED’s will light to provide a
Received Signal Strength
Decoder
Decoder Operating
Streaming
Indicates that the unit is streaming
video through the Ethernet port.
Rx Lock
When YELLOW, the demodulator
is locked
System Fault
Normally OFF. If an Alarm is
present, the LED will be RED.
Figure 5: AB-HDRX Receiver User Interface
