ANTIK IP telephone
63
User manual
ENGLISH
User name
Change key:
- Enter the code 1234.
- The telephone display shows:
Change user name
- Into the telephone enter the user’s name which will be shown during calling on
the called line’s telephone.
- Enter the name by using
the numeric telephone keypad
, where the procedure
in writing letters and numbers is described in the Chapter 1.2 “Table of Signs on
Numeric Keypad”.
- It is possible to move in the text of the name by using the button
18 (Cursor)
to left and right and delete signs by using the button
8 (Back)
.
- When you have entered the name, press the button
6 (Store)
to store it.
- The telephone display shows:
User's name
Entered
- Thus the name has been written in the telephone memory.
4.1.8 Setting VLAN 802.1Q
- Press the button
19 (Subnet mask)
on the telephone keypad and hold it until
the display shows:
802.1Q disable
Change key:
- Enter the code 1234.
- The telephone display shows:
4
