XP-1
ANTIGRAVITY BATTERIES
//
310 527 2330
//
Page 4 of 8
USER MANUAL
CHARGING USB DEVICES
The XP-1 can charge any USB 5V devices at 2.1 or 1.1 Amps, such as Smartphones, Tablets, GPS Devices, GoPro
Cameras and more.
Plug the provided 4-into-1 USB Cable (or any standard USB Cable) into either USB output port on the XP-1; plug the
other end of cable into the device you are charging.
Press the Power Switch on the XP-1 to begin charging your device.
Disconnect your device when charged.
NOTE: The number of times devices can be charged will vary depending on the size of your device’s battery.
CHARGING 12V AND 19V DEVICES
The XP-1 can charge or power other devices such as laptop computers and 12V accessories with its 12V and 19V ports.
Both ports have a 5.1 mm female output port that accepts the provided 5.1 mm DC male-connector cable (Male DC
connector on both ends). The ports are color coded for easy connection: 12V is yellow and 19V is black.
For 19V laptop charging you would plug the provided DC Cable into the 19V output port on the XP-1 and find the
appropriate Laptop Tip for your brand (8 Tips are provided with the kit
) and connect to your Laptop. To begin
charging press the Power Button on the XP-1.
For 12V charging you would plug the provided DC Cable into the 12V output port on the XP-1 and you would use this
DC Cable directly to your 12V device (or use your device’s cable ).
NOTE: Due to the variety of electronic devices and the number of different connector
types for devices it is impossible for our kit to contain the proper connector for all
laptop computers and electronic devices.
If your device uses a tip or cable that we do not include with the XP-1 you may find
a compatible cable that will work with it at online electronics suppliers. Please verify
with the Manufacturer of your device that the XP-1 is compatible for charging it!
The XP-1 requires a 5.1 mm x 2.1 mm MALE end to plug into its 12V and 19V ports.
1)
2)
3)
4)
1)
2)
