FAQ
Q
No audio/video being received?
A
Check the led indicator status to make sure all connections are good and
stable.
Q
LED “3” is flashing but no audio/video output?
A
Make sure the EDU (TV or display) is switched to the correct HDMI input.
Q
LED “2” is flashing but LED“3”is off?
A
Check the source and ensure content is being received. Check the HDMI
cable connected to the EDU is properly fitted. Consider changing one or
both of the HDMI cables.
3 Bi-directional IR Control
1. This extender supports bi-directional IR control. This means the source
device may be controlled from the remote location and the EDU (TV or
display) may be controlled from the source end.
2. If control is required at the receiver end, please connect IR transmitter
sensor cable to the IR OUT port on the transmitter box. Then connect
the IR receiver sensor cable to the IR IN port on the receiver box. This
configuration is reversed for control at the source end.
