ANTIFERENCE Conexer DMHD01 User Manual Download Page 12

 5 - Programming using a PC

The settings of the DMHD01 can also be changed using a PC. First, please install the 

software DMHDiFace on your PC. You can download this software from our internet site www.

antiference.co.uk/conexer-hdmi-modulator and select the ‘

downloads

’ tab.

 

After installation 

of this software, connect the DMHD01 using a USB cable (not included) to your personal 

computer. Then launch the program DMHDiFace. On the display of the DMHD01 the message 

<USB> appears, indicating that the programming is now performed through your PC. The 

following window appears on your screen

All parameters discussed in Chapter 4 of this user manual can be modified by DMHDiFace.

6 - Technical Specifications

DMHD01

9 - Declaration of Conformity:

We, ANTIFERENCE LIMITED herewith declare that the modulator CONEXER DMHD01 complies with all essential requirements 

and any other applicable conditions set forth on directive 1999/05/CE.

According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do not dispose of this product as household 

waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as 

required by practices established for your country. For information on recycling of this product, please contact your local 

authorities, your household waste disposal service or the shop where you purchased the product.

Date of issue: January 2014

Video input

Input

HDMI

Resolution modes

480p -576p -720p - 1080i

Compression

H.264 – bitrate 5-15 Mb/s

Audio input

Input

HDMI

Sample Rate

HDMI (32kHz / 44.1 kHz / 48 kHz)

Compression

AAC-LC – bitrate 128-384 Kb/s

DVB Processing

Table insertion

PAT, PMT, SDT, NIT

Configuration

Channel/network name, SID, LCN, TSID, ONID, NID, versions, audio, video PIDs.

DVB-T output

Output frequency / level

170-230 MHz + 470-862 MHz / > 80 dBμV

Constellation - FEC

QPSK/16QAM/64QAM - 1/2, 2/3, 3/4, 5/6, 7/8

Guard interval

1/4, 1/8, 1/16, 1/32

Mode - MER

2K/8K - 35 dB

DVB-C output

Output frequency / level

50-862 MHz / > 80 dBμV

Constellation - Symbolrate

16, 32, 64, 128, 256 QAM (EN 300 429) - 4,00 - 6,96 Msps

Power

DC 2.1 mm connector

+5V

Consumption

10 Watts

Dimensions

LxWxH

170x130x35mm

Weight

0.6 kg

12

Summary of Contents for Conexer DMHD01













Reviews: