MTU-GLR Maintenance
17
Anthony Liftgates, Inc.
800-482-0003
www.anthonyliftgates.com
1 — A-131115
Operation may require user to stand on platform.
To prevent injury or death of operators or bystanders:
• Read and follow operator/owner manual for safety,
operation, inspection, and maintenance instructions.
• Do not place unstable or unsafe loads on platform.
• Do not allow loads to extend over edge of platform.
• Do not allow body parts to contact moving components.
• Ensure footing is stable and stand away from edge
before raising or lowering platform.
• Owner/operators must properly maintain liftgate.
• Do not exceed capacity or use liftgate for anything
other than intended purpose.
• Be aware of surroundings when operating liftgate.
WARNING
A-131115
PERSONAL INJURY HAZARD
2 — ATU-423
ANTHONY TUCKUNDER LIFTGATES
OPERATING INSTRUCTIONS
Raise (twist) latch pin handle
upwards and then slide pin
sideways to release.
Do not force the latch. Liftgate may need to
be slightly raised or lowered to release
pressure on latch pin.
1.
Reverse steps to fold and store
platform. Make sure platform is
locked in storage position with
latch pin after use.
6.
Manually unfold main platform.
Always stand on curbside of truck when
unfolding platform.
3.
Manually unfold flipover section.
Always stand on curbside of truck when
unfolding flipover section.
4.
Raise and lower platform using UP and DOWN
functions of control switch.
5.
Press control switch DOWN until folded platform
rests on ground.
Always stand on curbside of truck when raising or lowering
platform with control switch.
2.
ATU-423
3 — A-150238
NOTICE
THIS LIFTGATE IS PROTECTED
WITH AN ELECTRICAL OVERLOAD
CIRCUIT PROTECTION DEVICE,
EITHER A CIRCUIT BREAKER, OR
A FUSE, AND IS LOCATED NEAR
THE POWER SUPPLY
A-150238
4 — ATU-141
ATU-141
5 — A-131061, ATU-147, A-171433, A-131120, A-131119
A-131061
MAXIMUM
CAPACITY
2500 lb.
ATU-147
MAXIMUM
CAPACITY
3000 lb.
A-171433
MAXIMUM
CAPACITY
4000 lb.
A-131120
MAXIMUM
CAPACITY
5000 lb.
A-131119
MAXIMUM
CAPACITY
6000 lb.
CAUTION
Make sure the proper
“ M A X I M U M
CAPACITY” decal is
placed on the truck for the appropriate lifting capacity
of the liftgate being installed. Do not put a higher rated
decal on a liftgate with a lower capacity; this could
result in liftgate damage or possibly personal injury.
Summary of Contents for MTU-GLR Series
Page 2: ......
Page 23: ...NOTES...
