Installation
Unpacking and Inspection
Each Classico CL-C and its accompanying owners' manual are packaged together in a
single carton. Carefully inspect them immediately after unpacking. If you note any
concerns or shipping damage, please contact your dealer. Do not install or use your CL-C
if it appears to be damaged.
Additional Items Required for Installation
The following additional items are required when installing your Classico CL-C and
connecting it to your system:
Item Description
Connecting Wire
AGA recommends high-quality 18-ga. or larger
connecting cables. There are several high-quality
speaker wires available, and you can discuss the
possibilities with your AGA dealer.
Adjustable Wrench
A small adjustable wrench should be used to
carefully
tighten the speaker connections.
Attaching the Grilles
The Classico Series grilles are held on to the speakers by magnets imbedded in the baffle
itself. Simply place the grilles carefully in position and they will "latch on" to the speakers.
If critical listening is your thing, you'll find a slight improvement in the speaker's
performance with the grilles removed.
7
System Examples:
An example of a surround sound with subwoofer (5.1 configuration)
setup using two stand-mounted CL-2s, one table-mounted CL-C center loudspeaker, two
wall-mounted CL-2s for the primary surround channels, and a Classico subwoofer is
shown in Figure 3.
6
Figure 4. Example of a Surround Sound (5.1 Configuration) Setup
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CLS-10
Subwoofer
Classico CL-C
Loudspeaker
