Anthem MRC 40 Series, Installation And Usage Manual

Page: 14 / 22

SpeakerProfile [analog]
The Speaker Profile join is used to change the profile for the current source. The valid profiles are between 1
and 4. The profiles need to be configured in advance to use this feature.
ListeningMode [analog]
The Listening Mode join is used to change the current listening mode. The currently available listening
modes are
Listening Mode Name
0 None
1 AnthemLogic-Cinema
2 AnthemLogic-Music
3 Dolby Surround
4 DTS Neural:X
5 DTS Virtual:X
6 All Channel Stereo
7 Mono
8 All Channel Mono
NOTE: If you select a listening mode that is not supported there will be no change in mode, and the feedback
will remain on the currently selected mode.
DolbyRange [analog]
The Dolby range join is used to set the Dolby Digital dynamic range. There are three valid options detailed in
the table below.
Range Name
0 Normal
1 Reduced
2 Late Night
IRCommand [analog]
The IR command join is used to simulate an existing IR command sent to the main zone. Some commands are
only accessible this way, like the OSD direction commands. Their are 37 available commands. A full list of
commands has been detailed below.
Page 14