Anthem MDX Crestron
Module
Tx$
[string]
This signal is for the MDX transmit data. It needs to be connected to the Tx$ join on your IP
Client or RS-232 symbol.
SourceFB[1-8]
[analog]
This signal will provide current source of the matching zone (see the Source input for a list
of possible values). The signals from 5 - 8 are designed to be commented out if you are
using the MDX-8.
VolumeFB[1-8]
[analog]
This signal will provide the current volume as a percentage (0% - 100%) for the matching
zone. The signals from 5 - 8 are designed to be commented out if you are using the MDX-8.
VolumeFB$
[string]
This signal provides the volume as a string (0.0 - 100.0) for the matching zone. The signals
from 5 - 8 are designed to be commented out if you are using the MDX-8.
ZoneName$
[string]
This signal provides the name set in the web interface for the matching zone. The signals
from 5 - 8 are designed to be commented out if you are using the MDX-8.
8
