ANTENERGY ANTPAK BP-300, Instruction Manual, Page: 13 / 18

13
Tech nical S pec s of DBMP
◆
DBMP Specifications:
Input Voltage 12V
Charging System Suitable for 10 Amps
Cut In Voltage 13.2 VDC
Cut Out Voltage 12.8 VDC
◆
DPMP Features:

The ANTPAK DPMP is a 12 Volts 10 Amp in-vehicle DC to DC charger designed
for keep your auxiliary battery charged whilst driving or with portable solar panels
when you are parked.

The system charges your auxiliary battery to their optimum levels, using
multi-stage DC DC charging.

The ANTPAK DPMP also features a DC to DC solar regulator, allowing you to
deliver the maximum amount of power from your solar panels to your auxiliary
battery.

With multiple levels of fault protection. The smart charger will act as a dual battery
isolator, should the voltage get too low, the start battery will be protected.

Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries

The smart charger will act as a dual battery isolator, should the voltage get too low,
the start battery will be protected.