Tip
: You cannot add effects processing to system audio, other than reverb.
Tip
: Configure your system audio outputs from Audio & MIDI Settings in macOS, or the Windows
Control Panel. Edge Go has four outputs which can be assigned to the Left and Right channels in
your operating system.
14.
Effects Rack
Click to launch the Effects Rack where you can stack audio effects and adjust their parameters to
taste. It looks like this when empty:
You are given the ability to save and load presets; bypass or delete all effects simultaneously; and
stack effects from the categories inside the drop-down menu. All effects can be re-ordered in the
virtual rack by dragging and dropping them in place.
Tip
: Unless you prefer the natural sound of the Edge Go’s built-in preamp, always start your effects
chain with a preamp emulation.
Tip
: Add EQ before compression. This way, you will be compressing the equalized signal. This is
not a hard and fast rule, but a reliable starting point.
Tip
: Manuals for the effects that come with the Edge Go are available in the Customer Support
section on the Antelope Audio website.
15.
Preset Selector
Use presets designed by studio professionals as a starting point towards nailing the type of sound
you are after.
