Discrete 8 Pro Synergy Core User Manual
Page 61
In addition to hardware re-amping through the REAMP outputs, you can re-amp DI
guitar tracks through the Synergy Core amps & cabs:
1. Open your DAW. Place your DI on a track and assign it to one of Outputs 1 – 32.
Remember: DAW Outputs = 'COMPUTER PLAY' channels.
2. Open the Control Panel and click the AFX tab. Click an Input Selector and choose the
'COMPUTER PLAY' channel with the same number as your DAW output.
3. Stack your amps, cabs and FX from the FX Rack.
4. Go to the DAW section and route AFX OUT channels corresponding to the number of
channels you are using (for example AFX OUT 1-4)
5. Create a new track in your DAW and enable live monitoring. Assign the correct DAW
input channel (same number as the output channel) and hit 'Play' in the transport
controls. You should be hearing your re-amped track and be able to record it.
E
DGE
& V
ERGE MIC EMULATIONS
Edge & Verge mic emulations are intended for use with the Antelope Audio Edge &
Verge modeling microphones only. We cannot guarantee optimal (or even usable) results
with other microphones.
Getting Started
Connect your headphones to HP1 on the front panel. Connect your Antelope Audio Edge
or Verge modeling microphone to the preamp/combo inputs. In our example, we are
using the Edge Duo, which is connected to inputs A1 and A2.
Summary of Contents for DISCRETE 8 PRO
Page 1: ......
Page 11: ...Discrete 8 Pro Synergy Core User Manual Page 12...
