ANTEK FU3AM-03, Operating Manual

Page: 23 / 30

Chapter 6: SERVICE-INFORMATION
Operating Manual FU3AM-03 Page 23 of 30
6. Service information
6.1 Summary of parameters
No. Parameter Explanation
30 Mode
31 switching fre-
quency Cycle frequency output stage
32 U-0 Output voltage
33 U-50 Voltage at 50Hz
34 f-nom Output frequency with max. set value specification
35 Offset Offset set value
36 Mult. of speed
set value Multiplier for set value
37 N1 fixed set value 1
38 N2 fixed set value 2
39 N3 fixed set value 3
40 tH Set value ramp during acceleration
41 tR Set value ramp during braking
42 n-nom Nominal speed for speed controller mode
43 number of poles Number of motor poles
44 Number of gra-
dations Number of gradations for pulse generator
45 t-n-act Speed actual value filter
46 KPn KP- speed controller
47 KIn KI- speed controller
48 regulator range Influence of speed controller
49 max difference Threshold nom.-act. -monitoring
50 t-difference Delay signal contact Nom.-Act monitoring
51 I-peak Current peak
52 I-Cont. Continuous current
53 t-I-act actual value filter
54 t-I-red Transit time current threshold
55 autoreset 0=no automatic reset
57 Temp. Mot. threshold motor temperature
58 Mot.-Sens. Temperature sensor motor
65 source set value Set value specification over analogue voltage/fixed set value or over
digital inputs SW_0 … SW_9