Step 3 - Assemble
Before assembling, you need to know exactly how you want your ant spiral tower to look in the end,
because it can be assembled in many different ways.
Note:
If you make a mistake or want to use the spiral tower in a different combination later, you can
easily disassemble it again.
First, you take one of the two floor/ceiling plates
and place it in front of you. At the corner of the floor/deck plate
the hose access is plugged in. This is possible on both sides,
depending on how it fits to your formicarium.
You fix the tube access with a clamping pin.
Then you insert the four hose columns,
with the recesses for the hose facing outwards, into the
Bottom / top plate and fix them with clamping pins as well.
