7
© 2020 Antari Lighting and Effects Ltd.
www.antari.com
FCR-1 Wireless Operation (Optional)
To operate the machine by wirless remote control, first connect the receiver to the rear of
machine. Press and hold the button on the transmiiter to activate smoke, release to stop.
Note: Wireless operation only available when machine connected to a power source.
Off Power Operation
MB-55 can operate plugged in once it has reached working temperature. The amount of
smoke produced depends on its temperature cycle when it is disconnected. With a complete
heating cycle the machine can generate smoke up to 45 minutes after disconnection.
The quality of fog must be carefully observed while operating disconnected to a main power
source. When smoke has become thin and blue indicates the temperature is getting low.
Reconnect machine to a main power source for heating process, once it has reached
working temperature it can be operated off disconnected again.
MB-55 might eject fluid when working temperature is not reached.
Aerosols
Only use Antari FLP-700 aerosol for the MB-55 Fog Machine. The machine is
tested and calibrated with this aerosol to get the best output performance.
Warranty will be voided if any other type of aerosol is used, improper use of
aerosol may lead to machine failure or malfunction.
