Antari M-9 RGBAW, User Manual

Page: 5 / 20

5
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Product Overview
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm open
space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to suitably rated power supply. To determine the power requirement
for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatley 14 mintues. Once
the machine has reached operating temper ature, the LCD display will show “Ready To Fog”. Now the
machine is ready for operation.
Step 5: To start making fog, locate the Volume button on the control panel, and press the button to
start making fog.
Step 6: To turn off the machine, press STOP button and turn Powercon to the OFF position.
Output Nozzle
OLED Control Panel
XLR 3 / 5-Pin DMX Connector
Neutrik TRUE 1 Power Connector
Wireless Receiver
LED