Antari F-5 Fazer, User Manual, Page: 13 / 16

12
DMX CONNECTOR PIN ASSIGNEMENT
The machine provides 3 or 5 pin XLR connector for DMX connection. Diagram below
indicate pin assignment information.
Making the DMX connection: connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin or a 5-pin XLR connector for
DMX connection, the connector is located on the front of the machine.
Set DMX/W-DMX address from 1 to 511
DMX512
ADRESS : XXX
SEC
VOLUME
OUTPUT XXX SEC
Set output volume from 1 to 100%
FAN SPEED
XXX %
Set fan speed from 20 to 100%
W-DMX POWER
XX
Turn on/off W-DMX
W-DMX RESET
XX
Unlink from a W-DMX transmitter
DMX512
ADRESS : XXX
SEC
AIR PUMP SENSOR
XX
Turn on/off air pump sensor
RUN LAST SETTING
XX
Turn on/off run last setting function