Antari F-3 Fazer, User Manual

Page: 8 / 36

8
Press the button FUNCTION until the display indicates » Fan Speed 20% «. Use the
buttons UP and DOWN to adjust the fan speed.
Please note that in standby mode, the machine resets the fan speed to 20 % in order to
recduce the noise production to a minimum.
Setting the DMX512 address
Press the button FUNCTION until the display indicates » DMX 512 «. Use the buttons UP
and DOWN to adjust the DMX512 start address. Please refer to chapter DMX512 settings
for more information on DMX operation.
2. Timer operation
In the timer mode, the fog machine will automatically emit fog. The time intervals,
duration and fog volume depend on the corresponding menu settings. Press the button
TIMER , to activate the timer mode. The display indicates the set time interval. The unit
counts down to 0 seconds and emits fog. To deactivate the timer mode, press the button
TIMER again. The unit is able to continuously produce fog without the need to reheat.
3. Continuous operation
Press the button VOLUME , to activate continuos fog output. The display indicates
» Volume « followed by the value that was set in menu item » Volume Output «. To stop
the fog output, press the button VOLUME once again. The unit is able to continuously
produce fog without the need to reheat.
4. Switching the pump sensor on and off
Simultaneously press the button MANUAL and connect the machine to a power outlet.
The machine will enter the setting mode for the integrated pump sensor and the display
will indicate » Airpump On «. Use the buttons UP and DOWN to deactivate the sensor
(indication » Airpump Off «) and to reactivate it (indication » Airpump On «).
Note, however, that this sensor is a very important protection mechnism. For proper
operation, it should be activated.