Antari F-2 Fazer, User Manual

Page: 5 / 20

5
© 2021 Antari Lighting and Effects Ltd. www.antari.com
Product Overview
Setting UP
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to a suitably rated power supply. To determine the power
requirement for the machine, refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximately 1.5
minutes. Once the machine has reached operating temperature, the LCD display will show
“Ready to Faze”. Now the machine is ready for operation.
Step 5: To start making haze, locate the Volume button on the control panel, and press the
button to start making faze.
Step 6: To turn-off the unit, press and hold down the Stop button for at least three seconds.
This will immediately begin the self-cleaning and shut down process. After the purging
process is complete the unit will automatically shut down and put itself in state of hibernation.
Output Nozzle
XLR 3-Pin & XLR 5-Pin
DMX Connector
LCD Display Control Panel
Power Input
Breaker