4
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Installed in a well ventilated area. Provide at least 50 cm space around the machine.
Never add flammable liquid of any kind to the machine.
Make sure there are no flammable materials close to the machine while operating.
Only use Antari fluid. Other fluid may lead to heater clog and malfunction.
If the machine fails to work, unplug the machine and stop operation immediately.
Contact your local Antari dealer for .
Before transporting the machine, make sure the fluid tank is completely drained.
Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it
securely. In case of eye contact or if fluid is swallowed immediately look for medical
advice.
Unpacking and Inspection
Open the shipping carton and verify that all equipment necessary to operate the system
has arrived intact. If any shortage or damage due to transportation, please contact your
Antari dealer and send back with original packaging for inspection. The shipping carton
should contain the following items:
.
-
DNG-250 Low Fog Generator
-
Two power cords for connecting to Neutrik PowerCon connectors.
-
3M fog conducting hose
-
User's manual (item 2-4 placed in the compartment on the top of the machine)
-
Water collection tray (preinstalled in the machine)
-
3M PU tube, 6mmØ
Setup
The wheels at the bottom of the DNG-250 help to move the machine; wheel fixing
mechanisms are located at the diagonal line. Position the machine at a spot, press
down the fixing mechanism to prevent it from moving. To move the machine, press
the opposite side of the fixing mechanism to release it. Please note that the machine
is not allowed to place on a slope due to its big size. (refer to figure 1)
Figure
