18
Ordercode: 80378
Antari S-500 Snow Machine
1. Timer Interval
In this menu you can set the time between snow bursts in Timer mode.
01)
Press the MENU button until the display shows TIMER INTERVAL.
02)
Press the UP/DOWN buttons to set the interval time. The adjustment range is 15–360 seconds.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
2. Timer Duration
In this menu you can set the snow burst duration in Timer mode.
01)
Press the MENU button until the display shows TIMER DURATION.
02)
Press the UP/DOWN buttons to set the duration time. The adjustment range is 5–120 seconds.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
3. Timer Output
In this menu you can set the output volume in Timer mode.
01)
Press the MENU button until the display shows TIMER OUTPUT.
02)
Press the UP/DOWN buttons to set the output volume. The adjustment range is 1–100 %, from low to
high output.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
4. Volume Output
In this menu you can set the output volume in Volume mode.
01)
Press the MENU button until the display shows VOLUME OUTPUT.
02)
Press the UP/DOWN buttons to set the output volume. The adjustment range is 1–100 %, from low to
high output.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
5. Fan Speed
In this menu you can set the fan speed.
01)
Press the MENU button until the display shows FAN SPEED.
02)
Press the UP/DOWN buttons to set the fan speed. The adjustment range is 20–100 %, from slow to fast.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
6. DMX Address
In this menu you can set the DMX address.
01)
In main menu, press the MENU button until the display shows DMX512.
02)
Press the UP/DOWN buttons to select the required address. The adjustment range is 001–511.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
7. Wireless DMX
In this menu you can activate/deactivate Wireless DMX.
01)
In main menu, press the MENU button until the display shows W-DMX POWER.
02)
Press the UP/DOWN buttons to select ON/OFF.
03)
Press the STOP button to confirm. The display will show READY TO SNOW.
Wireless DMX will not function. The S-500 is not equipped with a wireless DMX module.
Contact your Antari dealer to purchase the wireless DMX upgrade kit.
The wireless DMX upgrade kit should be installed ONLY by a qualified technician.
Do not attempt installation yourself!
8. Wireless DMX Reset
In this menu you can unlink the S-500 from its wireless DMX transmitter.
01)
In main menu, press the MENU button until the display shows W-DMX RESET.
02)
Press the UP/DOWN buttons to select ON/OFF.
03)
If you have selected ON, the S-500 will automatically start unlinking process.