ASC+ System Auto Split Charge & Engine Start Protect
User Guide and Installation Instructions
Document No 13362 Issue 04
Page 5 of 21
System overview
Equipment description
The ASC+ Auto Split Charge (ASC) & Engine Start Protect (ESP) System comprises the
following equipment: -
Controller module
This module contains the following: -
•
Micro-controller and necessary components to power & operate the system
•
Connection point for the primary contactor
•
Connection point for the secondary contactor
•
Connection point for the user switch panel
•
Connection point for the low-power permanent feed (e.g. clock, alarm)
•
Connection point for the ignition input
User switch panel
This panel (see Figure 1) contains the following: -
•
Two push switches with integral green LED
•
Mounting panel with label and fixing hardware
