- 3 -
Assembly AT51201 , AT51202, AT51203:
Connect the front member of the booster seat to the front of the toilet bowl, then screw the two fasteners with the
side screws. The ergonomic and robust construction of the screws allows a precise and permanent installation of
the booster seat. The fortifications were secured against slippage.
The raised and lower covers are secured against accidental disassembly.
AT51201 , AT51202
AT51203
Assembly AT51204:
• remove the two front plastic plugs
• loosen the screw and place the crossbar at the required height
• tighten it using two screws
• fix the rear crossbar in a similar way, both should be at the same height
• remove the existing toilet bowl, insert two threaded rods in the place of its fixing on the toilet bowl
• tighten the seat riser using plastic caps
• before first usage, make sure that the seat is correctly and securely mounted.
Assembly AT51205:
• armrests should be attached to the toilet lift with screws located in the assembly with the armrests (requires allen
4 wrench)
• Connect the front member of the booster seat to the front of the toilet bowl, then firmly screw the accessory to
the front of the booster seat using the screw. The ergonomic and robust construction of the screw allows a precise
and permanent installation of the booster seat. The handle was secure against slipping.
• The raised and lower covers are secured against accidental disassembly.
• before the first use, make sure that the seat has been properly and safely mounted.
ENG
AT51201_02_03_04_05_multi.indd 3
2022-06-27 01:30:37
