10
Maintenance of Self tailing winch
In case of complete inspection or
of the substitution of parts, it is
necessary to lift the self-tailing disks
to check the good state of the springs,
spacers and pawls.
For the dismantling of the gear
section at the bottom of the center
rod, proceed by removing parts of the
exploded view drawing.
Furthermore, open the gear section.
The steel axels are isolated from the
aluminum parts of the winch thanks to
resin insulating gaskets shaped like
a hat.
4
4
The pawls.
The bronze gears, the pawls and
the springs compose a system that
transmit motion in a specific way.
While re-mounting the gear section,
pay attention to the correct positioning
of the outer gear according to the
pawls direction.
5
NO
YES
5
6
6
Summary of Contents for XT66/AL
Page 12: ...w w w a n t a l i t ...
