2-Port RS422/485 Serial PCIe Card
5
TXD Control is Automatic
(Default)
TXD Control is Manual
(Needs to be Configured
Manually in the Device
Manager)
5.
Factory Use Only Connectors (J1):
This connector is only used for factory production purpose, please
don’t install any jumper or cable on it!
1.
Turn the system power OFF before installation!
2.
Remove the chassis cover from your computer
3.
Locate an unused PCI Express slot (typically smaller than PCI) and
remove the corresponding slot cover from computer chassis.
4.
Plug the RS422/485 PCIe card to the unused PCI Express
expansion slot and attached the I/O card bracket to the
computer chassis screw.
5.
Put the chassis cover back on the computer.
6.
Connect the RS422 or RS485 Devices to the DB9M Connectors of
the PCIe Card.
7.
Turn ON the power of your computer and peripherals.
8.
Proceed with Software Driver Installation.
NOTE:
4. Installing the RS422/485 PCIe Card
5. Software Installation
485TR
MAN AUT
485TR
MAN AUT
