PCI Express Multi Serial I/O Card
4
1.
When the PCI Card was inserted, it will invoke Windows’ New
Hardware Wizard. Click
〝
Next
〞
to continue, select
〝
Install from
a list or specific location
（
Advanced
）
〞
and click
〝
Next
〞
.
2.
Select
〝
Include this location in the search
〞
then click
〝
Browse
〞
to specify the driver’s location (e.g. E:\IO\OXFORD\XP32 for
Winodws XP, 32-bit) and click
〝
Next
〞
to continue.
3.
Click
〝
Next
〞
to continue, and click
〝
Finish
〞
to complete the
installation.
4.
To check the Installation, right click on
〝
My Computer
〞
and
choose
〝
Manage
〞
. Choose
〝
Device Manager
〞
and double click
〝
Ports
〞
.
5.
Choose the COM port properties as the following figure, select
〝
Data rate
〞
, if the Crystal Frequency is 1.8432MHZ, then your
installation is finished. If it is other frequency (e.g. 14.7456MHZ),
click
〝
Detect Crystal Frequency
〞
6.
The
〝
Crystal Frequency
〞
settings will be set to
〝
1.8432MHZ
〝
,
then click
〝
OK
〞
, repeat above steps for the other COM ports if
your PCI Card has multi serial ports.
7.
The settings will be saved by Windows. You don’t need to
configure it again whenever you restart the system
