Antaira Technologies - Industrial Ethernet Switches
LNX-C800G Series User Manual V1.0
5
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Gigabit Ethernet
switch that display the power status and network status. Each LED indicator has a different
color and has its own specific meaning, see below in
Table 2.4
.
LED
Color
Description
Power
Green
On
Power input is active
Off
Power input is inactive
LAN Port 1 ~ 8
(Left LED)
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1 ~ 8
(Right LED)
Green
On
Connected to network at 10Mbps
Flashing
Networking is active
Off
Not connected to network
2.5 Ethernet Ports
◼
RJ-45 Ports
RJ-45 Ports (Auto MDI/MDIX)
: The RJ-45 ports (LAN 1~8) are auto-sensing for 10/100/1000Base-
T, or 1000Base-Tx devices connections. Auto MDI/MDIX means that the switch can connect to
another switch or workstation without changing the straight-through or crossover cabling. See the
figures shown below for straight-through and crossover cabling schematics.
◼
RJ-45 Pin Assignments
(Table 2.5)
Pin Number
Assignment
1
Rx+
2
Rx-
3
Tx+
6
Tx-
Table 2.4
LED Indicators for LNX-C800G Series
Table 2.5
RJ45 Pin Assignments
