ANTAIRA LNX-500AG, User Manual

Page: 4 / 20

1
Introduction
Antaira’s LNX-500AG is a smart 5-Port Industrial Gigabit Unmanaged Ethernet Switch
supporting 5-Port 10/100/1000Tx that can automatically sense transmission speeds of
10/100/1000 Mbps. The RJ-45 interface can also be auto-detected, so MDI or MDI-X is
automatically selected and a crossover cable is not required. All Ethernet ports have
memory buffers that support the store-and-forward mechanism. This assures that data is
properly transmitted.
The LNX-500AG switch support 12~48VDC dual power inputs, and also offers an
extended operating temperature model (w/-T) that can withstand -40°C ~ 75°C. It
supports IEEE 802.3/802.3u/802.3x/802.3ab with 10/100/1000BTx for full or half duplex
data transmission. Meanwhile, it supports advanced protection with up to 3,000 VDC
EFT protection and 6,000 VDC ESD protections for Ethernet ports which makes the
Industrial switch more suitable for harsh environments.
In addition, the built-in Network Broadcast Storm Protection and built-in relay warning
function will alert network engineers whenever there is a power failure or port break.
Features

System Interface/Performance

RJ-45 Ports Support Auto MDI/MDI-X Function
 Ethernet Embedded 5-port 10/100/1000Tx
 Store-and-Forward Switching Architecture

Supports Jumbo Frame of 9.6Kbytes

Broadcast Storm Protection

8K MAC Address Table
 Port Break Alarm Mask

Power Input

DC 12 ~ 48V Redundant Power

Operating Temperature

Standard Operating Temperature Model: -10°C ~ 70°C
 Extend Operating Temperature Model with –T: -40°C ~ 75°C
 Case/Installation

IP-30 Protection