Antaira Technologies - Industrial Ethernet Switches
LNX-2004G-SFP Series User Manual V1.0
12
4. Hardware Installation
4.1
Installation Steps
This section will explain how to install Antaira
Technologies’ LNX-2004G-SFP(-T):
Installation Steps
1. Unpack the industrial Ethernet switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.
•
If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the
DIN-Rail Mounting
section for DIN-Rail installation.
•
If it is required to wall mount the industrial Ethernet switch, please refer to the
Wall
Mounting
section for wall mounting installation.
3. To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the
Mounting
Installation
section.
4. Power on the industrial Ethernet switch, then the power LED light will turn on.
•
For the help on how to wire power, please refer to the
Wiring the Power Inputs
section.
•
Please refer to the
LED Indicators
section for LED light indication.
5. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the
switch’s Ethernet port and on the other side into
the networking device’s Ethernet port, e.g. switch, PC, or server.
•
The Ethernet port’s (RJ-45) LED on the industrial Ethernet switch will turn on when
the cable is connected to the networking device.
•
Please refer to the
LED Indicators
section for LED light indication.
7. When all connections are set and the LED lights all show normal, the installation is complete.
