Antaira Technologies - Industrial Ethernet Switches
LNP-800AGH Series - Hardware Manual - v1.0
5 Technical Specifications
Table 5.1 has the technical specifications for this product series.
Technology
Standards
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet
Switch Properties
Switch Architecture
Back-Plane (Switching Fabric): 16.0Gbps
Protocol
CSMA/CD
Processing Type
Store and Forward
Flow Control
IEEE 802.3x for full duplex mode, back pressure for half duplex mode
Transfer Rate
14,880pps for 10Base-T Ethernet
148,800pps for 100Base-T Fast Ethernet
1,488,000pps for Gigabit Ethernet
Packet Buffer
4Mbits
Jumbo Frame
9.6Kbytes
MAC Table Size
8K
Port Interface
Ethernet Port
8*10/100/1000BaseTx with PoE+ (30W/Port)
Auto-negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X
connection
PoE Port Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
LED Indicators
System: Power 1, Power 2, Fault
Ethernet Ports: On-link / Flash-data transmitting
PoE: On-connected to PD devices
Protection
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair 2-pair UTP/STP Cat. 5 cable; EIA/TIA-568 100-ohm (100m)
1000BaseTX: 4-pair UTP/STP Cat. 5/5E cable; EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics
15
