Antaira Technologies - Industrial Ethernet Switches
LMX-3228G-10G-SFP Series - Hardware Manual - v1.0
4 / TP2+
7 / TP3+
4 / TP2+
4 / TP3+
5 / TP2-
8 / TP3-
5 / TP2-
5 / TP3-
6 / TP1-
2 / TP0-
6 / TP1-
6 / TP0-
7 / TP3+
4 / TP2+
7 / TP3+
7 / TP2+
8 / TP3-
5 / TP2-
8 / TP3-
8 / TP2-
Table 2.4 - 1000Base-T RJ45 Pin Assignments
Note:
“+” and “-” signs represent the polarity of the wires that make up each wire pair.
2.7 Cabling
Use the four twisted-pair, category 5e, or the above cabling for the RJ45 port connections. The cable between the switch
and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) in length.
The Small Form-Factor Pluggable (SFP) is a compact optical transceiver used in optical communications for both
telecommunication and data communication applications.
Caution:
Please employ an optional optical transceiver (SFP/Fixed Fiber) that complies with IEC 60825-1, 21 CFR
1040 Section 1040.10 and 1040.11, classified as Class 1 laser product.
Attention:
Veuillez utiliser un émetteur-récepteur optique en option (SFP/fibre fixe) conforme à la norme IEC
60825-1, 21 CFR 1040 Section 1040.10 et 1040.11, classé comme produit laser de classe 1.
2.8 Wiring the Power Inputs
Caution:
Please follow the steps below when inserting the power wire.
Attention:
Veuillez suivre les étapes ci-dessous lors de l'insertion du câble d'alimentation.
AC power module is supplied to the switch (AC models) through a standard IEC C14-3-prong receptacle, located on the
front of the module. Any national power cord with IEC C13 line plug may be used to connect AC power to the power
module.
8
