Antaira Technologies - Industrial Ethernet Switches
LMX-1002C-SFP Series Hardware Manual V1.0
6
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in
Table 2.1
.
LED
Color
Description
P1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
P2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Power input 1 and 2 are both functional, or no power,
inputs/ports link is active/port alarm is disabled
Owner
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On
Ring Network is active
Off
Ring Network is not active
LAN Port 1 ~ 8
(Left LED)
Green
On
Connected to network, 1000Mbps
Flashing Networking is active
Off
Not connected to network
LAN Port 1~ 8
(Right LED)
Green
On
Networking is active, 100/10Mbps
Flashing
Networking is active
Off
Not connected to network
Gigabit Combo Ports LED Indicators
LED
Color
Description
SFP Port
Combo G1~G2
LNK/ACT
Green
1000Mbps
On
Connected to network
Flashing
Networking is active
Amber
100Mbps
Off
Not connected to network
LAN Port
Combo G1 ~G2
(Upper LED)
Green
On
Connected to network, 1000Mbps
Flashing Networking is active
Off
Not connected to network
LAN Port
Combo G1 ~G2
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
Table 2.1 - LED Indicators for LMX-1002C-SFP Series
Caution:
"P1" is the abbreviation for "Power ", “P2” is for “Power 2”, “LNK” is for “Link”, and "ACT" is
for "Activity".
