Antaira Industrial Ethernet Switches
LMP-1002G-SFP Series Hardware Manual V1.2
1
1. Introduction
All Antaira industrial managed switches come with a pre-installed “user friendly” web console interface,
which allows users to easily configure and manage the units, whether one is using a serial console and
command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple network
management protocols (SNMP).
1.1 Product Overview
Antaira’s LMP-1002C-SFP series is a 10-port industrial Gigabit PoE+ managed Ethernet switch
that is embedded with 8*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of
30W/port, and 2*Gigabit combo ports with 2*10/100/1000Tx RJ45 or 2*100/1000 dual rate SFP
slots for Gigabit fiber connections. The Gigabit combo ports provide flexibility to users for either a
10/100 or 1000Tx Fast Ethernet or a plug in SFP key module with a 100MB or Gigabit fiber
connection. The combo ports help achieve bandwidth and/or distance concern applications. The
LMP-1002C-SFP series is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a
user-friendly web management console design. It supports the ring network redundancy function
using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol
that has a <50ms network recovery time. The advanced network filtering and security functions,
such as, IGMP, VLAN, QoS, SNMP, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase
determinism and improve network management for remote SCADA systems or control networks.
The LMP-1002C-SFP series is IP30 rated and DIN-rail mountable. There are also two wide
operating temperature models for either a standard temperature range (STD: -10°C to 70°C) or an
extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection
for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining,
factory automation, security surveillance within transportation, ITS and any other outdoor or harsh
environment.
1.2 Product Software Features
Network Redundancy
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for network
redundancy
Network Management
Web UI based management, SNMP v1/v2/v3, Serial Console
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
