background image

Antaira Technologies - Industrial Ethernet Switches 

LMP-0602-XX-V2 Series Hardware Manual V1.0 

 

 

1. Introduction 

All Antaira industrial managed switches come with a pre-

installed “user-friendly” web console 

interface, which allows users to easily configure and manage the units, whether one is using a serial 

console and Command Line Interface (CLI) commands like Telnet, SSH, HTTP (Web GUI) or Simple 

Network Management Protocols (SNMP). 

 
 

1.1 Product Overview 

Antaira Technologies’ LMP-0602-XX-V2 series 

is a 6-port industrial Gigabit PoE+ managed 

Ethernet switch embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a 

maximum of 30W/port and 2*100Fx fiber connections. The LMP-0602-XX-V2 is a fully manageable 

Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It 

supports the ring network redundancy function using the market’s open standard ITU-T G.8032 

ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The 

advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, 

Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network 

management for remote SCADA systems or control networks. 

 

The LMP-0602-XX-V2 series is IP30 rated and DIN-rail mountable. There are also two wide 

operating temperature models for either a standard temperature range (STD: -10°C to 70°C) or an 

extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for 

industrial networking applications, such as power/utility, water wastewater, oil/gas/mining, factory 

automation, security surveillance, ITS and any other outdoor or harsh environment. 

 
 

1.2 Product Software Features 

 

Network Redundancy

 

 

STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for 

network redundancy 

 

Network Management

 

 

Web UI based management, SNMP v1/v2/v3, Serial Console 

 

Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress, 

broadcast storm control, Diffserv 

 

IEEE802.1q VLAN tagging, port-based VLAN support 

Summary of Contents for LMP-0602-M-V2




















Reviews: